Happymodel
Happymodel Mobeetle6 1S 65mm 2-in-1 Whoop Drone
Happymodel Mobeetle6 1S 65mm 2-in-1 Whoop Drone
Regular price
$119.99 USD
Regular price
Sale price
$119.99 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
The new Mobeetle6 BNF would be the lightest 65mm mass production whoop in the world, hope you will enjoy it . The DiamondF4 Flight controller and 0702 motors were inspired from Angry Don FPV, we really appreciated for his help to Happymodel and to this hobby. We also very expecting to the performance of this BNF with the new Diamond F4 ELRS flight controller.
Specifications:
Brand Name: Happymodel
Item Name: Mobeetle6 whoop and toothpick 2-IN-1 FPV Racer Drone
Wheelbase: 65mm
Size: 80mm*80mm*30mm
Weight: 17.5g (without battery)
Features:
The lightest 1S Whoop and Toothpick 2-IN-1 fpv drone
Comes with tooth pick frame for convert
Powerful and efficiency
The lightest 1s AIO 5IN1 F4 flight controller
New Unibell SE0702 brushless motors with pcb wire board
Built-in OPENVTX up to 400mw
Low profile Canopy design
Package includes:
Item Name |
Qty |
65mm whoop Frame (Mobula6 frame) |
1 |
65mm toothpick frame(Mobeetle6 frame) |
1 |
Option1: DiamondF4 ELRS built-in SPI ELRS receiver |
1 |
Option2: DiamondF4 FR built-in SPI FRSKY receiver |
|
SE0702 KV23000 Unibell brushless motor |
4 |
Gemfan 1210 31mm propeller(4cw+4ccw) |
1 |
Runcam Nano3 |
1 |
Built-in 5.8G 48ch 25mw-400mw OPENVTX |
1 |
1s 300mah Lipo battery |
2 |
Mobula6 canopy |
1 |
Propeller disassemble tool |
1 |
Screwdriver |
1 |
Spare parts specifications:
Motor |
Mode:SE0702 KV23000Configu-ration:9N12PStator Diamter:7mmStator Length:2mmShaft Diameter:Φ1mmMotor Dimension(Dia.*Len):Φ9.5mm*14mmWeight(g):1.5gNo.of Cells(Lipo):1S only |
Propeller |
Weight:0.19gMaterial:PCPitch:1 inchProps Dia:30mmCenter Hole Dia:1mm |
Flight controller |
(ELRS SPI RX version)DiamondF4 ELRS FC Firmware target: CrazybeeF4SX1280(Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FRMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)Original whoop size compatiblePower supply: 1S battery input (DC 2.9V-4.35V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 readyBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G OPEN VTXBuilt-in SPI ELRS V2.0/Frsky receiverBuilt-in 5V 1A BEC |
Onboard 4in1 ESC |
MCU upgraded to EFM8BB21Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)Support BLHeliSuite programmableFactory firmware: O_H_50_REV16_8.HEXDefault protocol: DSHOT600 |
Onboard SPI ExpressLRS 2.4GHz Receiver |
Packet Rate option: 50Hz/150Hz/250Hz/500HzExpressLRS Firmware version: V2.0RF Frequency: 2.4GHzAntenna : Enameled copper wire antennaTelemetry output Power: <12dBmReceiver protocol: SPI ExpressLRSCompatible with ExpressLRS V2.0 TX ModuleCouldn’t flash separately ExpressLRS firmware |
Onboard Frsky SPI D8 receiver Version |
SPI BUS receiver Frsky D8 compatibleCompatible Non EU transmitter D8 modelChannels: 8chFailsafe supportNo ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m |
Onboard 5.8g OPENVTX |
Firmware version: OPENVTXSmartaudio v2.1PIT Mode supportRCE Mode supportChannels:48chTransmitting Power: 0/RCE/25mw/100mw/400mwPower supply: DC 5VCurrent (5v): <650ma (400mw) |
Runcam Nano3 |
Model: RunCam Nano 3Image Sensor: 1/3″ CMOSHorizontal Resolution: 800TVLLens : 2.3mm(M6.5) FOV 140°Signal System: NTSCS/N Ratio: >50dBElectronic Shutter Speed: AutoAuto Gain Control (AGC): AutoMin. Illumination: 0.01Lux@1.2FD-WDR: AutoDay/Night: ColorPower:DC 3-5.5VCurrent: 110mA@5V 120mA@3.3VHousing Material: ABSNet Weight: 1.2gDimensions: L14mm*W14mm*H9mm |
Lipo Battery |
Capacity:300mAhVoltage:3.8vContinuous Discharge Rate: 30CSize: 57mmx12mmx7mmWeight: 7.5gConnector: PH2.0 |
Shipping & Returns
Shipping & Returns
Dimensions
Dimensions
